Abstract: Today, the rapid development of the garment industry has also put forward higher requirements for accessories. Buttons, sequins, zippers, metal fasteners and other accessories can be exquisite use of clothing design to another level of realm, then, now the garment enterprises on the accessories business has what kind of urgent requirements?
Few industry like the Chinese garment industry now, both the smoke of the four dangerous, there are flowers and brocade Sheng.
Clothing accessories are small, in the garment industry supply chain, the cost of only a small part, but it is "China to create" the role can not be underestimated, such as small sewing thread, if the opening line, the clothing brand image is also serious Fight against. Buttons, sequins, zippers, metal fasteners and other accessories can be exquisite use of clothing design to another level of realm, then, now the garment enterprises on the accessories business has what kind of urgent requirements?
Now the clothing, fashion is a very prominent feature. And this fashionable expression, can not be separated from the use of accessories. Whether it is internationally renowned design master or fledgling design junior, are aware of clothing accessories on a people put it down the importance of clothing.
Li said that as a fashion designer, more concerned about the accessories can reflect the design of clothing designers wisdom and inspiration, fully embodies the fashion personality of clothing. For example, in the design of the details of the cuffs, chest, neckline, pocket, waist and pants, designers will often use hot drilling, sequins, lace, metal fasteners, Finishing touch "role. A flat clothing, often because of a few accessories cleverly embellished and suddenly become different. Now zipper, buttons, hot drilling, metal fasteners and other accessories in the clothing design status is more and more stressed, was used, whether it is high-end wedding dress, or popular fashion ladies and casual wear, once the design of the accessories Embellishment, grade and value greatly improved.
Now the domestic garment accessories enterprises have sprung up, these have shown that China's garment accessories industry continues to grow and develop, clothing accessories market contains great opportunities and potential. On the other hand also shows that the rapid development of garment industry clothing clothing produced a strong demand. "However, the number of domestic high-grade auxiliary materials production enterprises less.As a garment enterprises, we hope to buy from the domestic low cost, high quality accessories, but found that operating high-grade lining of the enterprise very few." Li said.
However, it is understood that the auxiliary enterprises are also difficult, many companies that the production and operation of high-end accessories risk. According to a distribution of high-grade lining of the staff, they operate a brand lining in the physical and chemical properties and performance are significantly better than other lining, but the higher cost of raw materials, manufacturing process is more complex, so the product sales price 4 to 5 times higher than ordinary lining, about 10 times higher than the low-grade lining. Due to price factors, sales in the country is not large, only a small number of high-end international brand clothing using the product, so the risk of operating high-grade accessories.
For the garment industry, with China's accession to the WTO, textile export quota problem is not the main contradiction in the textile and garment industry, replaced by the product quality of environmental indicators as a "green trade barriers" new export restrictions; another Aspects, people have been on the "green environment" concept in the gradual deepening. Clothing environmental protection is inseparable from the environmental protection of raw materials, accessories in addition to practical and decorative two functions, must be healthy, safe, environmentally friendly.
"At present, some auxiliary materials produced by the zipper and other accessories, heavy metals and free formaldehyde content are varying degrees of excessive, as more details, it is not the producers pay attention to these factors tend to use the clothing brand Bring great hidden dangers, because the harm to consumers is not accessories business, but clothing enterprises. "Li said.
There was a sequined production enterprises to reporters, they produced sequins, the surface has been a certain technical treatment, very smooth, will not scratch the skin, it will not have adverse effects on the skin.
Of course, now "green products", "eco-textile" concept enjoys popular support, will require accessories to meet the performance of clothing at the same time, towards high-tech, functional, information technology, green and other direction to meet people's clothing Never-ending pursuit.
Many domestic enterprises more and more focus on "health, safety, environmental protection" aspects of the duties. Such as the implementation of ISO14000, OKO-TEXI00 and other international standards, standardize the production process to ensure clean energy, and to ensure product quality and stability. Namely: the use of "environmental protection law before processing" and "physical law finishing" technology, so that products meet the requirements of eco-textiles. The use of modern biological enzyme technology to replace the traditional alkali-oxygen chlorine bleaching process, with little environmental pollution and harm to the human body; suspension loose baking physical mechanical pre-shrinking finishing technology to replace the traditional high resin anti-shrink technology. Water washing size changes and the gap between the free formaldehyde and also ensure that the free methanol content of less than 50PPM.
In addition, as high-quality brand-name clothing are introduced by the industry known as the "green suit", "green suit" non-adhesive lining suit. Non-adhesive liner selection of pure wool thin fabric, lined with no chemical synthesis of the adhesive lining, and the use of natural materials. Clothing production was originally low pollution, and now do not use chemical adhesives, non-adhesive liner can be washed, so there is no chemical adhesives and dry cleaning agent environmental pollution problems.
"There are many problems in the clothing accessories products need to rely on science and technology to solve, such as clothing anti-static treatment problems." Li said, "especially in northern China, autumn and winter dry climate, high-grade ladies skirt lining adsorption in the body On the impact of the beautiful high - end male suits in the wear off when the material is easy to produce static electricity, so that the original flat cashmere sweater, shirt deformation, wrinkle, causing a little embarrassment.
However, due to the domestic textile technology, fiber technology, dyeing and finishing technology constraints, the current market anti-static fabric, lining part of the finishing process is achieved through. This anti-static clothing after two or three times after washing, the surface of the anti-static effect greatly weakened, anti-static function also disappeared, and did not fundamentally solve the problem of anti-static clothing. Another part of the anti-static fabric, although the material in the fabric by adding a conductive wire, but because of processing, finishing technical problems are not completely overcome, fabric feel poor, and therefore basically used for work clothes, protective clothing processing, Clothing market.
Garment accessories enterprises are working to develop new products through technological innovation. In general, the technical development of accessories companies is not simply to increase the function, but the design, reduce costs, mechanical development elements organically together. Many companies look forward to new product development can bring greater business opportunities. Like a number of products developed by Science and Technology won the title of provincial and municipal and national new products, including "a high permeability black carbon lining" by the State Intellectual Property Office granted utility model patents, "low aldehyde spinning shrink lining" Included in the national key new product plan, "two-point all-inclusive compatibility lining", "high-grade functional clothing cloth" was included in the national Torch Program projects, the company has also been listed as a national key high-tech enterprises.
While China can achieve an annual output of billions of meters of material production, the vast majority of middle and low products, lining production for the rapid development of the garment industry needs, there is still a certain gap. Polyester lining, nylon lining, viscose silk material to occupy the market main body. Polyester lining, although easy to wash fast drying, fastness characteristics, but poor ventilation, easy to produce static electricity. Nylon lining material is the advantage of elastic recovery, wear, but the type of resistance, heat resistance is poor, not very good. Viscose silk material although the performance close to cotton fiber, comfortable and soft, but easy to deformation, strong lower, fastness, color fastness are poor. In recent years, acetate fiber lining into the new favorite, acetate fiber lining in the feel, flexibility is better than viscose silk lining, to a certain extent, the effect of silk, but low strength, poor hygroscopicity, poor wear resistance, shrink Rate big.
At present, China can be called lining, zipper and other clothing materials production power, not only a variety of accessories, the total output of high, and through the auxiliary materials production enterprises to actively adopt advanced science and technology, and continuously strengthen product development and the introduction of foreign advanced technology, Technology, gradually narrowing the gap between China's accessories industry and the international advanced level, so that China's scientific and technological content of accessories products continue to increase, continuously improve product quality, there are many products have been exported to meet international quality standards. With the development of production, and now China has emerged such as Xiamen Yao Ming Ribbon Jewelry Co., Ltd., Ningbo should Branch Technology Industrial Co., Ltd., the new textile group and a number of new textile enterprises such as the production of outstanding enterprises and Wenzhou Qiaotou and other clothing materials Industry Base. The focus of these clothing accessories manufacturing enterprises are working to scale, serialization, brand direction.